SawStop CNS175 - The SawStop Brake Cartridge

56 SawStop 10” Contractor Saw
Using Your Saw
Using a Mobile Base or a Job Site Cart
In many situations it is important to be able to move the saw from one location to another. For example, you
may want to store the saw against a wall in your workshop and then move it away from the wall to use it or you
may need to transport the saw to and from a job site. SawStop offers an optional mobile base and a job site
cart that allow you to reposition your saw with ease.
The SawStop
®
Contractor Saw
Mobile Base is designed specically
for your saw (see Fig. 71). It attaches
to the stand and automatically lifts
the saw onto the wheels when you
step on a lever. When the wheels are
down, you can roll the saw from one
location to another. Stepping on a
release will then raise the wheels and
lower the saw back onto its feet.
Fig. 71
You can learn more about the SawStop
®
Contractor Saw Mobile Base and the SawStop
®
Job Site Cart from
an authorized SawStop distributor or at www.sawstop.com.
Fig. 72
The SawStop
®
Job Site Cart is also designed specically for your saw (see Fig. 72). It replaces the stand and
attaches directly to the cabinet. The large 10 inch rubber tires allow you to easily move the saw over rough or
uneven ground.