Scaime eNod4-C - Page 61

61
SCAIME Manual : NU-eNod4C-E-0418-196712-F.docx
Function
Function assigned to the related output: None, Thresholds, Stability, Coarse feed,
High feed, fine feed, Cycle ongoing, result available, Out of tolerance, Dosing fault,
Input copy, Remote control, Out of tolerance +, Out of tolerance –
Logic
[Positive], [Negative]
Defines idle output state.
Mode
[Windows], [Hysteresis]
Thresholds functioning principle
Comparison
[Gross], [Net], [result]
Comparison value for thresholds control
Weight / pulse
external totalizer
0 – 65535
For external totalization purpose, eNod4 sends a pulse
on logical output when the totalization value reaches
multiple of this parameter. When an overflow is
occurred on pulses output an alarm is set.
Thresholds control
Allows modifying the Threshold values of the concerned outputs.
Remote Control
Allows fixing the level [On], [Off], of the concerned outputs.