ScanSpeed Mini - Warranty; Appendix - Allowable Maximum Speed; Appendix - RPM to RCF Conversion

16
5. Service Mode
5.1 Transition into service mode
On the Control panel
1) Power ON while pushing the RPM/RCF key and Start/Stop key at the same time
2) After 2 seconds push the UP( ) key and then push the DOWN( ).
3) Service mode begins.
5.2 Handling values
1) Confirm the set values with left side Up/Down key.
2) Power off to return from service mode.
current RPM
Motor output frequency
Motor output voltage
Motor input voltage
Motor Temperature
Display program version
Main program version
sum of operation time