ScanSpeed Mini - 7 Maintenace; Cleaning and Disinfection

19
7. Maintenace
7.1 Cleaning and disinfection
1) Outer part of device
① Clean the outside of the device with a dry soft cloth. If necessary, dip the cloth
with neutral detergents and clean contaminated parts. Keep dry completely after
cleaning.
② Do not use any volatile chemicals such as alcohol, benzene, etc.
③ If any rust appears, clean with neutral detergents and dry it.
2) Inner part of device
① Keep dry inside the chamber after every use of the device.
② Clean the shaft always for avoiding an imbalance error during the rotation.
③ If any part is contaminated, clean with neutral detergents.
3) Rotor
① Clean the rotor if rotor is contaminated by any samples.
② Keep dry it after usage.
4) Moving or shipping of device
① If you need to move the device, make sure to protect the shaft from any physical
impact.
② Remove the rotor and fill inside the chamber with proper materials to keep the
shaft on place.