Schaerer Coffee Arc C - Touch Screen Calibration

Schaerer Coffee Art C - Generic 24mo Preventative Maintenance SOP
7C. Touch Screen Calibration
Items Needed:
1. Service Card
1.
• Insert “SERVICE” card into card reader
and enter ‘PIN CODE” to enter “Pro-
gramming Menu.
2. - Confi guration Menu ►
• After entering programming menu,
Press “Setup Touch It”, to advance to
next screen.
3. - Calibration Touch Screen Menu ►
• Press “Calibrate Touch Screen” and
wait for the white screen to appear as
shown in step 4.
4. ►
• After entering the White Screen,
follow instructions on screen.
5.
• After completing step 4, another white
screen will appear.
• Simply touch the screen to complete
the process.
• NOTE: Previous versions of Touch-
IT Software will not display the second
screen and will automatically reboot after
completing step 4.
6.
• After completing step 5, the machine
will reboot. Remove Service Card at this
time.
• After machine has completed the re-
boot process, test touch display function
and repeat process if necessary.