THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
32
PAGE 2
FIG. 5.2
All commands in this page allow to start the watermaker with different options.
PRODUCTION TIMER
It allows to select the working time of the watermaker (1-6 hours) by pressing on the arrow ”>”.
AUTOMATIC STARTUP
This function activates automatically the first start up procedure. The procedure is necessary when a new
machine is started for the first time, or after the filter cartridge replacement, or a general service. The
procedure allows to purge completely the air from the system, and from the seawater and the washing fresh
water hoses. The depressurization valve must be opened before start the procedure. The distinctive color is
YELLOW.
PERIODIC WASH
This function allows a periodic automatic rinsing (every 6 up to 10 days) with fresh water. It can be used before
long inactivity periods. The single washing operation will last about 1 minute. The consumed fresh water, for
every washing, is about 20 liters. Therefore it is suggested to evaluate if the fresh water reservoir is enough
for the programmed cycles. When this function is activated the FLUSH button is on and a count down appears
in the Timer box.
MANUAL WASH
Used to start a 10-minute washing procedure. The system can be stopped at any time by pushing STOP.
To Next Page
Loading...
Need help?
General
