Schenker MODULAR 150 Installation, Use & Maintenance Manual

3 – PRODUCT PRESENTATION COD.150M230.T.2021
EN
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
19
3.8.3 Accessories
The main accessories of the watermaker are the following:
• Active carbon filter
• Electrovalve
• Non-return valve
• Mesh filter (strainer)
ACCESSORIES
FIG. 3-13
Non-return valve
Active carbon filter
Mesh filter
Electrovalve
Active carbon filter. This filter is connected between the fresh water pressurized system of the boat and the
electro valve on the filter holder. On the filter inlet is positioned a manual valve that allows replacement of the
cartridge without depressurizing the fresh water system of the vessel.
Electrovalve. It has the function of switching from seawater intake to fresh water tank when washing the
watermaker.
Non-return valve. It stops water flowing out of the inlet hose. It must be installed vertically. It stops leaking
of fresh water from the seacock whilst the washing procedure commences.
Mesh filter. The machine is equipped with a mesh filter to protect the pump from macro sediments. This is
placed between the seacock and the pump.

Schenker MODULAR 150 Specifications

General

Brand	Schenker
Model	MODULAR 150
Category	Water Filtration Systems
Language	English