www.scheppach.com
GB
|
23
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (g. 1)
1. Wheel clutch lever
2. Handle
3. Handlebar adjustment
4. Belt cover
5. Mowing unit clutch lever
6. Handle
7. Throttle
8. Engine
9. Wheels
10. Mower unit for cutter bar mower
3. Scope of delivery
Item Quantity Designation
11 1x Belt cover
12 1x Guide bar
13 2x Wheel
14 2x Axle cover
15 1x
Mower unit for cutter bar
mower
16 1x Device with handlebar
17 4x M8x20 mm ange screw
18 4x Hexagonal nut M8
19 2x Pin
20 1x M8x25 mm ange screw
21 4x M8x25 mm hexagonal bolt
22 4x Hexagonal nut M8
4. Proper use
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator,
not the manufacturer, is responsible for damages or
injuries of any type resulting from this. An element of
the intended use is also the observance of the safety
instructions, as well as the assembly instructions and
operating information in the operating manual.
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Application other than specied
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
To Next Page
Loading...
Need help?
General
