www.scheppach.com
26
|
GB
3. Device description (Fig. 1-14)
1.
2.
3. Nozzles (red, green, white, black)
4. Transport bracket
5. Fixing plug
5.1 Sleeve
6. Star grip screws
6.1 Star grip screw screws
7. Tubular frame
8.
9. Fuel tank
10. Carburettor
11.
12. Oil inlet/dipstick
12.1 Oil dipstick
13. Wheel
14. Rubber foot
15. Cleaning agent tank
16. Filler cap for cleaning agent tank
17.
18. Pull cable starter
19. Fuel valve
20. Choke lever
21.
22. Silencer
23.
24. Trigger lock
25. Trigger
26.
27.
28. Water outlet
29. Water inlet
30.
31. Spark plug/Spark plug connector
32. Axle
33. Spring split pin
34. Nozzle cleaning needle
35. Spark plug wrench
36. Filling hose with funnel
37. Quick connector
38.
39. Oil drain screw
40. Inlet screen
41. Petrol drain plug
4. Scope of delivery
• Wheels (13)
• Axle (32)
• Spring split pin (33)
•
•
•
•
• Low pressure nozzle / cleaning nozzle (black) (3)
• Transport bracket (4)
2. Introduction
Manufacturer:
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
-
Note:
laws, the manufacturer of this device assumes no
device arising from:
• Improper handling
•
•
specialists.
• Installing and replacing non-original spare parts,
• Improper use.
Note:
Read the whole text of the operating manual before
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the de-
vice, for avoiding danger, for minimising repair costs
extending the service life of the device.
-
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture.
-
sonnel before starting the work.
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
-
to the operation of such machines must also be ob-
served.
occur due to a failure to observe this manual and the
To Next Page
Loading...
