www.scheppach.com
38
|
GB
Device does not build up pressure Nominal speed of the engine too
slow
Check the nominal speed of the engine;
contact customer service.
Fit the high-pressure nozzle.
Nozzle clogged / washed out Clean / renew nozzle
Bleed the device (see “Before commis-
sioning”).
pump leaking or clogged
-
sure pump. Contact customer service.
Pump is defective Contact customer service.
Device leaks, water drips from the
bottom of the device
The high-pressure pump leaks A maximum of 3 drops / minute is permis-
sible. In case of severe leakage, have the
Cleaning agent is not sucked in Fit the low-pressure nozzle.
Cleaning agent hose leaking or
blocked
Check or clean the cleaning agent hose
To Next Page
Loading...
