To Next PageTo Next Page
How to fix a loose saw blade on a Scheppach HS105?
If the saw blade gets loose on your Scheppach Saw after turning off the motor, it's likely because the fastening nut wasn't tightened sufficiently. To fix this, tighten the fastening nut, which has an M20 left-handed thread.
General| Product color | Blue, White |
|---|---|
| Built-in light | No |
| Country of origin | Germany |
| Suitable for materials | Wood |
| Saw blade included | Yes |
| Input power | 2000 W |
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Blade diameter | 255 mm |
| Number of teeth | 60 |
| Idle speed (max) | 7000 RPM |
| Bevel capacity (max) | 45 ° |
| Cutting depth (45º) | 50 mm |
| Cutting depth (90º) | 80 mm |
Weight and Dimensions| Depth | 760 mm |
|---|---|
| Width | 690 mm |
| Height | 380 mm |
| Weight | 30500 g |
Provides essential safety guidelines for operating power tools.
Ensures a safe operating environment by maintaining cleanliness and proper lighting.
Details precautions for safe electrical connections and usage.
Emphasizes operator alertness, protective equipment, and proper attire.
Highlights dangers and precautions during various cutting operations.
Explains kickback phenomena and preventive safety measures.
Rules for safe operation, placement, and handling of table saws.
Guidelines for safe installation, removal, and use of saw blades.
