www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26
|
GB
Changes to the machine will cause the manufactur-
Even when the device is used in accordance with the
designated purpose, it is nevertheless not possible
Due to the design and structure of the machine, the
• Touching the saw blade in the area of the saw
which is not covered;
• Reaching into the running saw blade (cuts)
• Kickback of workpieces and workpiece parts.
• Saw blade breaks.
•
• -
tion is not used.
• Emissions of wood dust which are harmful to the
health when used in closed rooms.
m Please note that the use of our devices in accord-
ance with the designated purpose does not include
commercial, handicraft or industrial applications. We
-
cial, handicraft or industrial businesses or for equiv-
alent purposes.
5. Safety information
General power tool safety warnings
m WARNING: Read all safety warnings, instruc-
tions, illustrations and technical data provided
with this power tool.
-
Save all warnings and instructions for future ref-
erence.
-
ated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of am-
mable liquids, gases or dust. Power tools create
c) Keep children and bystanders away while op-
erating a power tool.
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
matching outlets will reduce risk of electric shock.
• Push stick
• Pillars (4x)
• Centre struts (4x)
• Rubber feet (4x)
• Stand bracket (2x)
• Table supports (4x)
• Manual
• Hexagon head screw with cross slot with mounted
U-washer / spring washer 16 units (a)
• Carriage bolt, 19 units (b)
• U-washer, 27 units (c)
• Spring washer, 20 units (d)
• Nuts, 27 units (e)
• Ring spanner SW 10/22 (f)
• Open-end spanner SW 10 (g)
•
• Hexagon head srew (k)
4. Intended use
-
of round timbers must not be cut with it.
purpose.
be not in accordance with the designated purpose.
which are suitable for the machine (HM or CV saw
blades).
cutting discs is prohibited.
Use in accordance with the designated purpose is
-
-
structions in the operating manual.
Individuals who operate and maintain the machine
must be familiar with it and must have been instruct-
ed in possible hazards. Moreover, the latest accident
m Caution!
must be complied with in order to avoid injuries and
damage. You should therefore read these operating
in a safe place so that the information is available to
else, please give them these operating instructions
To Next Page
Loading...
Need help?
General
