Page 5.12
SCHILLER AT-2plus 6-Channel ECG Unit
SERVICE HANDBOOK Issue d May 2002
Chapter 5
Adjustments
Software Options / Updates
Installing Software Options
To upgrade the AT-2 from standard to C version type the following:
ALT - 0 - 4 - update code (obtainable from SCHILLER)
Acceptance of the code is indicated by a series of beeps.
CAUTION
MORE THAN 10 ATTEMPTS TO ENTER THE INCORRECT CODE BLOCKS THE UNIT
Installing Software Updates
To update the operating software in the AT-2plus see instructions in Chapter 1 of this book.
To Next Page
Loading...
