Schlage Artus - Installation; Prepare the door; Fasten posts

Installation
Exterior assembly
1. Prepare the door
Interior assembly
2
Keypad
A. Follow the Schlage
Artus template to
prepare your door.
B. Mount lockbody
into position.
A. Attach the post
to the lower stud
on the back of the
external unit.
B. Attach the second
post to the xing
post screw. Slide
the screw head
into the slot on
the top of the back
of the external unit.
Loosely tighten post
to screw to allow
free movement.
2. Fasten posts
Battery cover
Reset button
B.
A.
Cylinder