SCHUBERTH SC1M - 4 Getting Started; Button Operation

SC1M
10
•
Using the Adhesive Tape
1. Attach double sided adhesive tapes to the back plate of the RC3.
2. Attach double sided adhesive tapes to the helmet or the motorcycle
body.
3. Make sure that the main unit sticks on the helmet rmly. Maximum
adhesion occurs after 24 hours.
1 2
4 GETTING STARTED
4.1 Button Operation
•
SC1M
DC Power Charging
& Firmware Upgrade
Port
Status LED
Multi-function
Button
•
RC3
Battery Release Hole
Center Button
(+) Button
(-) Button
Battery Slot