SC1M
11
English
4.2 Powering On and O
4.2.1 SC1M
Power on/o the SC1M
•
Using the SC1M
Press and hold the Multi-function Button for 1 second.
•
Using the RC3
Tap the (+) Button and the Center Button.
4.2.2 RC3
To begin using the RC3, remove the plastic tape from the battery slot.
To power on the device, tap the Center Button. To power o the device,
press and hold the (+) Button and the Center Button for 1 second.
4.3 Charging
4.3.1 SC1M
You can charge the SC1M by connecting the supplied USB power &
data cable into a computer’s USB port or USB wall charger. You can use
any standard micro USB cable to charge the unit. The LED turns red
while charging and turns blue when fully charged. It takes about 2.5
hours to be completely charged.
or
AC Adapter
Note:
Please make sure to take o your SC1M-installed helmet while charging. The
headset automatically turns o during charging.
To Next Page
Loading...
Need help?
General
