SCHUBERTH SC1M - Helmet Installation Guide; Installing the SC1 M Main Unit; Installing the RC3 Remote Control

SC1M
9
English
3.2 Installing the RC3
There are three ways of installing the RC3.
•
Using the Clip
1 2
•
Using the Hook and Loop Fasteners
1. Attach the hook fastener to the RC3.
2. Attach the loop fastener to the helmet or the motorcycle body. Attach
the RC3 using the hook and loop fasteners that you tted.
1
Hook Fastener
2
Loop Fastener
3 INSTALLING THE SC1M ON YOUR
HELMET
3.1 Installing the SC1M
1. Remove the cover.
2. Insert the main unit into the helmet and push it gently until you hear
a click.