SC1M
15
English
5.3 Advanced Selective Pairing - A2DP Stereo or
Handsfree
Phone Pairing allows the headset to establish two Bluetooth proles:
Hands-Free or A2DP Stereo. Advanced Selective Pairing allows the
headset to separate the proles to enable connection with two devices.
5.3.1 A2DP Stereo Music Only
1. To enter the conguration menu, press and hold the Center Button for
10 seconds until you hear the voice prompt, “Conguration menu”.
2. Tap the (+) Button until you hear a voice prompt, “Media selective
pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the SC1M
in the list of the devices detected on the mobile phone.
4. If your mobile phone asks for a PIN, enter 0000.
5.3.2 HFP for Phone Call Only
1. To enter the conguration menu, press and hold the Center Button for
10 seconds until you hear the voice prompt, “Conguration menu”.
2. Tap the (+) Button until you hear a voice prompt, “Phone selective
pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the SC1M
in the list of the devices detected on the mobile phone.
4. If your mobile phone asks for a PIN, enter 0000.
5.4 Intercom Pairing
5.4.1 Pairing with Other SC1M headsets for Intercom
Conversation
The SC1M can be paired with up to three other headsets for Bluetooth
intercom conversation.
1. Press and hold the Center Button of the headset A and B for
5 seconds until red LEDs of the both units start to ash rapidly.
2. Simply tap the Center Button of any one of the two headsets A and
B, and wait until the LEDs of both headsets turn to blue and intercom
connection is automatically established.
To Next Page
Loading...
Need help?
General
