SC1M
28
14.2.7 HD Voice (Default: Disable)
HD Voice allows you to communicate in high-denition during phone
calls. This feature increases the quality so that the audio will be crisp
and clear during phone call conversations. If this feature is enabled,
incoming phone calls will interrupt intercom conversations and audio
from the SR10 will not be heard during intercom conversations. Three-
Way Conference Phone Call with Intercom Participant will not be
available if HD Voice is enabled.
Note:
1.
Refer to the manufacturer of your Bluetooth device that will be connected to
the headset to see if it supports HD Voice.
2.
HD Voice is active only when Audio Multitasking is disabled.
14.2.8 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality
to HD quality. HD Intercom will become temporarily disabled when you
enter into a multi-way intercom. If this feature is disabled, the two-way
intercom audio will change to normal quality.
Note:
1.
The intercom distance of HD Intercom is relatively shorter than that of normal
intercom.
2.
HD intercom is active only when Audio Multitasking is disabled.
14.2.9 Voice Prompts (Default: Enable)
You can disable voice prompts by software conguration settings, but
the following voice prompts are always on.
–
Headset conguration settings menu, battery level indicator, speed
dial, FM radio functions
14.2.10 RDS AF Setting (Default: Disable)
Radio Data System (RDS) Alternative Frequency (AF) Setting
allows a receiver to re-tune to the second frequency location when the
rst signal becomes too weak. With RDS AF enabled on the receiver, a
radio station with more than one frequency can be used.
14.2.11 FM Station Guide (Default: Enable)
When FM Station Guide is enabled, FM station frequencies are given by
voice prompts as you select preset stations. When FM Station Guide is
disabled, the voice prompts on FM station frequencies will not be given
as you select preset stations.
14.2.12 Advanced Noise Control™ (Default: Enable)
When Advanced Noise Control is enabled, the background noise is
reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.