SAFETY
UNDERSTAND SAFETY WORDS AND SYMBOLS
The header of safety decals on this equipment contain a signal word and color code to indicate the
severity level of the hazard. The most common safety decal headers are as follows:
IMPORTANT - outlines actions that promote safety or prevent machine damage, in black and white.
WARNING - denotes a specific potential hazard, and uses the color orange.
DANGER - denotes a most serious specific potential hazard, and uses the color red.
READ THE OPERATORS MANUAL
Any person who will be operating or maintaining this equipment should first read and understand this
manual and all safety warnings on the unit.
This instruction manual should always be available to those responsible for the operation and
maintenance of this equipment. It is the owner’s responsibility to provide this safety information to his
operators and employees.
Any person who does not understand the safety and operation instructions contained in this manual
should not be considered qualified to operate this mixer.
FOLLOW SAFETY INSTRUCTIONS
Specialized procedures and instruction are required and must be adhered to when working on this
equipment. Failure to follow the instructions contained in this manual could result in product or
property damage, severe personal injury, and/or death. All applicable safety procedures such as
OSHA requirements, regional and local safety codes and requirements, safe working practices and
good judgment, must be used by personnel when operating or maintaining this equipment.
-3-
This SAFETY ALERT SYMBOL is used in this manual whenever
personal safety is involved and means ATTENTION! BECOME
ALERT! It stresses an attitude of “HEADS UP” for safety. Read
and understand all pages in this manual that bear this safety
symbol and……TAKE TIME TO BE CAREFUL!
To Next Page
Loading...