ADJUSTMENTS
FLOOR APRON
The floor apron on your Schuler Mixer has been designed for maximum strength and long life.
Pintle chain is standard equipment with a much higher strength than 67X steel detachable
chain.
The apron driving sprockets should push against the barrel end of the pintle link, not the pin.
Materials provide a downward force Materials push against the face of the
on the angle flight preventing materials angle flight, with a tendency to force
from building up underneath, thus the flight to bend up and back.
reducing the likelihood of bending the Materials may then get under the flight
angle flight. Flight strength is at the and could cause flight bending.
maximum when used this way.
-13-
To Next Page
Loading...