Assembly
03.00 | AGE-XY | Assembly and operating manual | en | 389007
13
4 Assembly
4.1 Mounting the AGE on the robot
Position of the item numbers Assembly drawing [
}
20]
Mounting the AGE on the robot
1 Robot with interface
according to DIN ISO 9409
2 Compensation unit AGE-XY
3 Allen key for assembly
Ø Fasten the AGE to the robot interface with four mounting
screws (The screws are pre-mounted.)
Ø The cylindrical pin (included in the accessory kit) can be used to
center the AGE.
To Next Page
Loading...
