SCHUNK AGE-XY Series - Air Connection; Sensor Installation

Assembly
14
03.00 | AGE-XY | Assembly and operating manual | en | 389007
4.2 Air connection
CAUTION
Observe the requirements for the air supply
Technical data [
}
12].
air connection
1 connection A "unlock" 2 connection C "save position"
3 connection B "lock"
• Only open the air connections required.
• Seal the air connections not required using with a suitable blind
plug.
4.3 Installing the sensors
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is equipped for the use of sensors.
• For the exact type designations of suitable sensors, please see
the catalog datasheet.
• For technical data for the suitable sensors, see Assembly and
Operating Manual and catalog datasheet.
– The Assembly and Operating Manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.