SCHUNK AGE-XY Series - MMS 22 Magnetic Switch Installation

Assembly
03.00 | AGE-XY | Assembly and operating manual | en | 389007
15
4.3.1 MMS 22 magnetic switch
ca.
brown
black
blue
load
closer
CAUTION
Risk of damage to the sensor during assembly!
• Observe the maximal tightening torque.
NOTE
Ferromagnetic material changes the switching positions of the
sensor. For example: Adapter plate made of ordinary steel.
At ferromagnetic adapter plates:
• First mount the product on the adapter plate.
• Then set the position of the magnetic switch.
NOTE
• Do not use the sensor as a safety component.
• Do not pull on the cable of the sensor.
• Secure the cable and connection plug so that they are not
taught and cannot move during operation.
• Do not exceed the permitted bending radius of the cable.
• Do not allow the sensor to come into contact with hard objects
and chemicals (e.g., nitric acid, chromic acid and sulfuric acid).