SCHUNK AGE-XY Series - Magnetic Switch Assembly and Adjustment

Assembly
16
03.00 | AGE-XY | Assembly and operating manual | en | 389007
Assembly and
adjustment of the
magnetic switches
Assembly steps for mounting the magnetic switches
A Magnetic switch 2
"unlocked state"
B Magnetic switch 1
"locked state"
"Locked"
compensation unit
Ø Apply pressure to connection B to lock the AGE.
Ø Push magnetic switch 1 into the profile groove until it switches.
Ø Mount magnetic switch 1 in this position with the screw in the
magnetic switch.
Ø Unlock and lock the AGE to test its function.
"Unlock"
compensation unit
Ø Apply pressure to connection A to unlock the AGE.
Ø Push magnetic switch 2 into the profile groove until it switches.
Ø Mount magnetic switch 2 in this position with the screw in the
magnetic switch.
Ø Unlock and lock the AGE to test its function.