SCHUNK ROTA NC plus 2 Series - Attachment and disassembly of the chuck; Pre-assembly measures

Attachment and disassembly of the chuck
02.00|ROTA NC plus 2 / ROTA NCF plus 2 |en
27
Attachment and disassembly of the chuck
The item numbers specified for the corresponding individual
components relate to chapter drawings.( 12, Page 42)
Pre-assembly measures
Carefully lift the product (e.g. using suitable lifting gear) from the
packaging.
CAUTION
Danger of injury due to sharp edges and rough or slippery
surfaces
Use personal protective gear, especially safety gloves.
Check the delivery for completeness and for transport damage.
7
7.1