SCHUNK ROTA NC plus 2 Series - Page 44

Appendix on Declaration of Incorporation, as per 2006/42/EC,
annex II, No. 1 B
02.00|ROTA NC plus 2 / ROTA NCF plus 2 |en
44
Appendix on Declaration of Incorporation, as per
2006/42/EC, annex II, No. 1 B
1. Description of the basic safety and health protection requirements, as per 2006/42/EC,
Annex I, that apply to and are fulfilled for the scope of the partly completed machinery:
Product designation:
Power Lathe Chucks with Through-hole (centrifugal force
compensatompensation)
Type designation
NCF plus 2 / NC plus 2 in sizes 185-52; 215-66; 260-86; 315-104
ID number
0854106; 0854107; 0854108; 0854109; 0854116; 0854117; 0854118; 0854119; 0854126;
0854127; 0854128; 0854129; 0854136; 0854137; 0854138; 0854139; 0852106; 0852107;
0852108; 0852109; 0852116; 0852117; 0852118; 0852119; 0852126; 0852127; 0852128;
0852129; 0852136; 0852137; 0852138; 0852139.
To be provided by the System Integrator for the overall machine
⇓
Fulfilled for the scope of the partly completed machine
⇓
Not relevant
⇓
1.1
Essential Requirements
1.1.1
Definitions
X
1.1.2
Principles of safety integration
X
1.1.3
Materials and products
X
1.1.4
Lighting
X
1.1.5
Design of machinery to facilitate its handling
X
1.1.6
Ergonomics
X
1.1.7
Operating positions
X
1.1.8
Seating
X
1.2
Control Systems
1.2.1
Safety and reliability of control systems
X
1.2.2
Control devices
X
1.2.3
Starting
X
1.2.4
Stopping
X
1.2.4.1
Normal stop
X
1.2.4.2
Operational stop
X
1.2.4.3
Emergency stop
X
1.2.4.4
Assembly of machinery
X
1.2.5
Selection of control or operating modes
X
1.2.6
Failure of the power supply
X
1.3
Protection against mechanical hazards
1.3.1
Risk of loss of stability
X
1.3.2
Risk of break-up during operation
X
1.3.3
Risks due to falling or ejected objects
X
1.3.4
Risks due to surfaces, edges or angles
X
1.3.5
Risks related to combined machinery
X
1.3.6
Risks related to variations in operating conditions
X
1.3.7
Risks related to moving parts
X
1.3.8
Choice of protection against risks arising from moving parts
X
1.3.8.1
Moving transmission parts
X
1.3.8.2
Moving parts involved in the process
X
1.3.9
Risks of uncontrolled movements
X
12