SCHUNK ROTA TB 630-310 - Translation of Original EC Declaration of Incorporation

Translation of original EC declaration of incorporation
02.00|0889073_ROTA TB-TBS-
EP |en
71
Translation of original EC declaration of
incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
H.-D. SCHUNK GmbH & Co.Spanntechnik KG
Lothringer Str. 23
D-88512Mengen
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product
designation:
ROTA TB/TB-LH/TBS/TBS-LH/EP/EP-LH
ROTA TB 400-115; 400-140; 470-185; 500-160; 500-205; 500-230; 600-
275; 610-260; 630-265; 630-310; 630-325; 630-330; 800-365; 800-375;
800-395; 800-410; 1000-534 pneumatic chucks. ROTA TB-LH 400-140;
470-185; 500-205; 500-230; 600-275; 610-260; 630-265; 630-275; 630-
325; 850-375; 1000-560; 1200-640. ROTA TB-LH-LC 850-375. ROTA EP
380-127; 460-165; 460-185; 500-260. ROTA EP-LH 460-165; 460-185;
500-260; 610-265.
ID number
0818001; 0818002; 0818011; 0818012; 0818050; 0818122; 0818131;
0818017; 0818032; 0818040; 0818041; 0818240; 0818005; 0818004;
0818015; 0818016; 0818019; 0818051; 0818125; 0818026; 0818135;
0818141; 0818014; 0818035; 0818003; 0818006; 0818007; 0818052;
0818008; 0818009; 0818023; 0818018
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
DIN EN ISO 12100:2010
Safety of machinery - General principles for design - Risk
assessment and risk reduction
DIN EN ISO 1550:
1997+A1:2008
Machine-tools safety – Safety requirements for the design
and constructions of workholding chucks
Other related technical standards and specifications:
DIN ISO 702-1:2010-04
Machine tools – Connecting dimensions of spindle noses
and work holding chucks – Part 1: Conical connection
DIN ISO 702-4:2010-04
Machine tools – Connecting dimensions of spindle noses
and work holding chucks – Part 2: Cylindrical connection
VDI 3106:2004-04
Determination of permissible speed (rpm) of lathe chucks
(jaw chucks)
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery to state offices.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery have been created.
Person authorized to compile the technical documentation:
Philipp Schräder, Address: see manufacturer's address
Mengen, January 2016
Name
17