Schwinn 190 - SPECIFICATIONS; Before Assembly

6
SPECIFICATIONS
Maximum User Weight: 150 kg ( 330 lb )
Total Surface Area (footprint) of equipment: 9790.8 cm
2
(1518.1 in
2
)
Machine Weight: NJOE
Power Requirements (AC Adapter):
Input Voltage: 9$&+]$
Output Voltage: 12V DC, 3A
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
KDUGOHYHOVXUIDFH:HUHFRPPHQGDQDVVHPEO\DUHDRIP[PLQ[LQ(VWLPDWHGWLPHWRDVVHPEOHWKH
PDFKLQHLVPLQXWHV$OORZDZRUNRXWDUHDRIDPLQLPXPP[PLQ[LQ
NOTICE: Inspect the machine for damaged parts due to delivery. If damage is found, contact Customer Service (if inside
US/Canada) or your local distributor (if outside US/Canada) for assistance.
Basic Assembly Tips
Follow these basic points when you assemble your
machine:
1. Read and understand the “Important Safety
Instructions” before assembly.
2. Collect all the pieces necessary for each
assembly step.
3. Using the recommended wrenches, turn the
bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless
instructed otherwise.
4. When attaching 2 pieces, gently lift and look
through the bolt holes to help insert the bolt
through the holes.
7KHDVVHPEO\FDQUHTXLUHSHRSOH
1.4 m
56 in
1.8 m
71 in
0.6 m
24 in
0.6 m
24 in
82 cm (32.3 in)
119.4 cm (47 in)
144.3 cm (56.8 in)
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.