Schwinn 190 - HARDWARE; TOOLS

8
HARDWARE / TOOLS
Tools
Included Not Included
PP
(recommended)
Note: Selected pieces of Hardware have been provided as spares on the Hardware Card. The spare Screw (*) is
for the Water Bottle Holder. Be aware that there may be remaining Hardware after the proper assembly of
your machine.
#2
13 mm
14 mm
15 mm
#2
13 mm
14 mm
D
E
F
G
Item Qty Description Item Qty Description
A 2 Leveler Foot ( 1 Flat Washer, Narrow, M8
B 1 Handlebar Clamp Handle F 1 Flange Lock Nut, Serrated, M8
C1%XWWRQ+HDG+H[6FUHZ0[ G23DQ+HDG3KLOOLSV6FUHZ0[
D 1 Spring Washer, M8