scil element RC - Page 24

__________________________________________________________________________
Vers. 20210510ENG Page 24
7. The analyzer scans the
QR code on the test
rotor and begins
countdown. Patient
information can be
added by touching
SAMPLE INFO.
8. Touch STOP to
terminate current
patient sample
analysis.
9. Touch OK when the
test is terminated.
CAUTION
Test rotor and patient sample will
no longer be valid after
terminating testing.
NOTE: If QR code scanning is
unsuccessful, the system will
display a pop-up prompt.
If a barcode error prompt pops up,
touch OK and remove the test
rotor to inspect the QR code for
damage or contamination. If the
QR code is damaged the test rotor
must be replaced.
10. When the test time has
elapsed, the test is
completed, and the test
results can be
viewed/transmitted/
printed.