__________________________________________________________________________
Vers. 20210510ENG Page 7
When discarding the analyzer that may be contaminated with blood samples, follow
applicable regulations for your country and dispose of appropriately.
1.4 Compliance with Safety Measures
For using analyzer safely and efficiently, please observe the following precautions:
1. Avoiding failure of analyzer
The installation environment of the analyzer should meet the requirements of the
installation environment in this manual.
2. Preventing electric shock
Do not open the shell of the analyzer without the authorization of scil and prevent the
introduction of liquids into the analyzer. Please contact scil Technical Support Services
with any questions. Ensure that the power cord is in good condition before use. Do not
use a damaged electric cord to prevent electric shock.
3. Biohazard
Protective gloves should be worn during biochemical testing operations to prevent
biological contamination. If the blood sample is accidently touched, immediately rinse
the contaminated area thoroughly under running water and disinfect.
4. Operating reagent rotor
Reagent beads may contain corrosive substances, follow the instructions strictly in
accordance with the manual. The operator will not contact the reagent beads sealed in
the reagent rotor during normal use unless the reagent rotor fails. If reagent beads are
released, avoid direct contact with reagent rotor and avoid breathing reagent dust.
5. Disposing reagent rotor
Used reagent rotors should be disposed of in accordance with applicable regulations.
To Next Page
Loading...
Need help?
General
