Themes
This function allows the light or dark theme of the
display to be set.
●
From the Interactive Menu, use (1) and
(2) to select the item menu" and press
ENTER (3).
●
Select the “Display” item and press ENTER (3).
●
Select the "Themes" item and press ENTER (3).
The “Auto”, “Light” and “Dark” items are displayed.
While the currently set level is shown on the right.
The "Auto" mode allows the display theme to
automatically change according to the ambient light
detected by the instrument panel.
Use (1) and (2) to scroll and select the desired
item. Press ENTER (3) to validate, then select "Back",
and press ENTER (3) again to exit.
Note
In case of disconnection, the "Auto"
mode is automatically set.
...
Back
Dark
Light
Auto
Focus mode
Brightness
Themes
Back
Fig 113
141
To Next Page
Loading...