The arrows and available values appear for the
number of minutes (Fig 134). Use (1) and (2)
to scroll and select the desired value. Press ENTER
(3) to confirm and move on to the AM/PM selection.
The “AM” or “PM” item becomes selectable (Fig 135).
Use (1) and (2) to select the desired value.
Press ENTER (3) to confirm.
Note
If the currently set time format is 24 hours, the
AM/PM parameter is not shown.
...
Back
Set date
Time format
Set time
Date format
23
24
26
27
10 : 25 pm
Gear
N
Fig 134
...
Back
Set date
Time format
Set time
Date format
10 : 25 pm
am
Gear
N
Fig 135
154