G777,G27,A777,A20 - Page 3
Setting The Time
The LCD display is equipped with a 12-hour clock
Set the time:
1. Press and hold Buttons 2 and 3 for three seconds.
· The remote will beep two times and three bars will be shown indicating time set mode is entered.
2. Press and release Button 2 until the correct hour is displayed. (hold button to scroll).
3. Press and release Button 3 until the desired minute is displayed. (hold button to scroll).
4. When the desired time is displayed, press Button 5 to store.
· The remote will beep 3 times to indicate the time has been set.
Setting the control unit internal Auto Daily Start time
The Autostart function is set to a time of a day.
Set the unit Autostart clock function:
1. Press and hold Buttons 2 and 3 until the remote beeps two times.
·”Daily Start” icon will turn ON .
2. Press Button 2 until the desired hour is displayed.
3. Press Button 3 until the desired minute is displayed. The button may be held down to scroll faster.
4. When the desired time is displayed, press Button 1 to send to the daily start time to the control
unit.
· The remote will send and receive confirmation, the responce will display the daily start time
set in the unit.
Setting the pager Auto Daily Start Function ( transmitter must be within 1500ft to reliably
start)
The Daily Start Function provides a timer that allows the vehicle to automatically remote start at a preset
time of day , everyday until the feature is turned off.
Set the pager Autostart clock function:
1. Press and hold Buttons 2 and 3 until the remote beeps three times.
·”Alarm On ” icon wil turn ON .
2. Press Button 2 until the desired hour is displayed.
3. Press Button 3 until the desired minute is displayed. The button may be held down to scroll faster.
4. When the desired time is displayed;
press Button 5 to turn ON the daily start time
press Button 1 to turn OFF the daily start time
To Next Page
Loading...
