EasyManuals Logo

Sea-doo GTS Series User Manual

Sea-doo GTS Series
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
MAINTENANCE PROCEDURES
Engine Oil Change and Oil Filter
Replacement
The oil change and filter replacement
should be performed by an authorized
Sea-Doo dealer.
Engine Coolant
Recommended Engine Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specif-
ically formulated for internal combus-
tion aluminum engines.
NOTE: When available, it is recom-
mended to use biodegradable an-
tifreeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
Fill cooling system with BRP PRE-
MIXED COOLANT (P/N 219 700 362),
or with a water and antifreeze solution
(50% distilled water, 50% antifreeze).
NOTE: Using a blend of 40% an-
tifreeze with 60% demineralized wa-
ter will improve the cooling efficiency
when watercraft is used in particularly
hot weather and/or hot water condi-
tion.
To prevent antifreeze deterioration, al-
ways use the same brand. Never mix
differentbrands unless cooling system
is completely flushed and refilled. Re-
fer to an authorized Sea-Doo dealer.
Engine Coolant Level
WARNING
Check coolant level with engine
cold. Never add coolant in cooling
system when engine is hot.
CAUTION Certain compo-
nents in the engine compartment
may be very hot. Direct contact may
result in skin burn.
Open seat.
Locate the expansion tank cap.
smo2011-003-010_c
TYPICAL
1. Expansion tank cap
With watercraft on a level surface,
coolant level should be between MIN.
and MAX. marks on coolant reservoir
when engine is cold.
F18E0NY
1
TYPICAL - COOLANT EXPANSION TANK
1. Level between marks when engine is cold
NOTE: The watercraft is level when
it is in water. When on a trailer, raise
trailer tow pole and block in this posi-
tion when bumper rail is level.
Add coolant/demineralized water to
adjust coolant level between marks
as required. Use a funnel to avoid
spillage. Do not overfill.
Properly reinstall and tighten filler cap,
then reinstall ventilation box an
dclose
seat.
NOTE: A cooling system that fre
-
quently requires coolant is an indica-
tion of leaks or engine problems. See
an authorized Sea-Doo deale
r.
112
______________

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sea-doo GTS Series and is the answer not in the manual?

Sea-doo GTS Series Specifications

General IconGeneral
ManufacturerSea-Doo
TypeRecreational
Fuel TypeGasoline
CategoryPersonal Watercraft
Engine ConfigurationInline
Seating Capacity3
Storage Capacity26.4 gallons

Related product manuals