Sea-doo GTS Series User Manual

INFORMATION CENTER (GAUGES) (GTI/GTR/WAKE)
1
2
LAP TIMER FUNCTION EXAMPLE
1. Total lap times 02'23'37 displayed
here
2. Lap count "ALL" displayed here
To reset the lap timer and lap counter,
press and hold the SET button until the
timer and counter are reset to 0 (zero).
Ski Mode
Ski mode is used for repeated con-
trolled launches when towing a skier
or wakeboarder. Refer to
OPERATING
MODES
for more details.
ECO Mode
ECO mode is a function by which en-
gine fuel consumption is reduced. Re-
fer to
OPERATING MODES subsection
for detailed instructions.
Fuel Consumption
The FUEL CONSUMPTION function is
used to display the watercraft fuel con-
sumption four different ways:
– Instant fuel flow per hour (gal/h or
L/h)
– Average fuel flow per hour (gal/h or
L/h)
– Distancetoempty(MiorKm)
– Timetoempty(hormin).
The fuel consumption functions are
not continuously active.
The fuel consumption function se-
lected becomes active only when se-
lected as the indication in the numeri-
cal display.
When the LOW FUEL indications
come on in the multifunction gauge,
the "TIME TO EMPTY" and "DISTANCE
TO EMPTY" functions will indicate "0"
(zero) if they are the selected indica-
tion.
To display the watercraft fuel con-
sumption, carry out the following:
1. Press the MODE button repeatedly
until FUEL CONSUMPTION is visi-
ble in the multifunction display.
MESSAGE DISPLAYED
FUEL CONSUMPTION
2. Press the UP/DOWN button to tog-
gle to the desired fuel consumption
display mode.
1
2
FUEL CONSUMPTION DISPLAY
MODE
1. INSTANTFUELCONSUMPTION
message
2. Applicable value
3. Press the SET button to save the
setting and return to the main dis-
play.
_______________
61

Sea-doo GTS Series Specifications

General

Manufacturer	Sea-Doo
Type	Recreational
Fuel Type	Gasoline
Category	Personal Watercraft
Engine Configuration	Inline
Seating Capacity	3
Storage Capacity	26.4 gallons