| Page 35 | SEABOB Operation Manual | 5
5.4 Operating the SEABOB
Never run the motor out of the water for longer
than approx. 10 seconds. The seals of the motor
and the hard-coated motor shaft are designed exclu
-
sively for use in the water. Operation out of the water
leads to overheating due to the lack of water to cool the
device, thereby causing irreparable damage to the seals
and motor shaft.
5.4.1 Controls and display panel
1. Green button = plus button
2. Red button = minus button
3. Silver* button = select button
4. Blue button = select button
5. Powergrip = motor enable (on / off), power control,
confirm button
6. Graphic LCD display, black / white display with adjust
-
able background brightness and contrast setting
* or black
To Next Page
Loading...
