G4K Pro User Guide
Contents
1. Hardware overview
2. Software installation on control PC
3. G4K Pro management Software
3.1. Device
3.1.1. Connect singe G4K Pro
3.1.2. Connect multiple G4K Pro as daisy chain
3.1.2.1. Set Up unique IP address for each G4K Pro
3.1.2.2. Daisy chain units with CAT cables
3.1.2.3. Daisy chain units with HDMI cables
3.1.2.4. Connect devices to screens
3.1.2.5. Set up daisy chain in management software
3.1.2.6. G4K Pro Daisy Chain Example
3.2. Output
3.2.1. Choose the resolution of the screens
3.2.2. Enter the parameters of screens
3.2.3. Create video wall layout
3.2.3.1. Add screens onto the wall
3.2.3.2. Delete screens from the wall
3.2.3.3. Change the layout of the screens
3.3. Input
3.3.1. Manage the input
3.3.1.1. Lock aspect ratio, Frame
3.3.1.2. Open input source window
3.3.1.3. Close input source window
3.3.1.4. Resize input source window
3.3.1.5. Move input source window
3.3.1.6. Change EDID
3.3.1.7. Check input resolution
3.3.1.8. Source test mode
3.4. Tool Bar
3.4.1. Pre-set layouts saved on device
3.4.2. Firmware update
3.4.3. Version of firmware of devices
3.4.4. Home
3.4.5. Show Measurements
3.4.6. Snap to Display
3.4.7. Snap to Grid
3.4.8. EDID Editor
3.4.9. Save as
3.4.10. Load Layout
3.4.11. Language
4. Troubleshooting
To Next Page
Loading...
