Seada SD-MV-CM41 - Signal Switching

4K 4x1 Seamless Switcher with Multi-view
Website: www.seada.co.uk 21 / 33 E-mail: sales@seada.co.uk
Command Description
Command & Feedback
Example
#GET_IP_ADDR Get the IP to access GUI.
@IP_ADDR:
192.168.0.178
@SUBNET_MASK:
255.255.255.0
@GATEWAY:
192.168.0.1
8.2 Signal Switching
The ending mark of command is “<CR><LF>”.
Command Description
Command & Feedback
Example
#SET_AV [INPARAM] TO
[OUTPARAM]
Switch an input AV signal to one or
more outputs.
[INPARAM]=1 ~ 4
1 - HDMI 1
2 - HDMI 2
3 - HDMI 3
4 - HDMI 4
[OUTPARAM]=A ~ D.
[OUTPARAM]=Null. Switch any input
to window A.
#SET_AV 1
#SET_AV 1 TO
@AV 1 TO A
#GET_AV [PARAM]
Get the current AV switching status of
input or output channel.
[PARAM]=A ~ D.
[PARAM]=Null. Get all switching
status.
#GET_AV
@VIDEO
OUT A B C D
IN 1 2 3 4
@AUDIO_SRC 1
#SET_AUTO_SWITCH
[PARAM]
Enable/disable auto switching mode.
[PARAM]=0~1.
0 - Disable
1 - Enable
#SET_AUTO_SWITCH 1
@AUTO_SWITCH 1
#GET_AUTO_SWITCH
Get the auto switching status.
@AUTO_SWITCH 1