Seada SD-MV-CM41 - 1 Product Introduction; Features; Package List

4K 4x1 Seamless Switcher with Multi-view
Website: www.seada.co.uk 1 / 33 E-mail: sales@seada.co.uk
1. Product Introduction
The 4K Multi-view switcher is seamless video scaler designed to enable a true 4K
display. The switcher features four HDMI inputs and one HDMI output which allows you
to display four video sources on one display. It also provides a line input, 1 mix input, 1
SPDIF output and 1 analog output for audio processing.
Control is quick and comprehensive, whether you are using the front panel, the remote
control, RS232 commands, or the fully featured web GUI.
1.1 Features
 4 HDMI inputs, 1 HDMI output.
 Supports 4K@30Hz 4:4:4, HDCP 2.2.
 Seamless switch between 4 input ports.
 Auto Scaler in each source input.
 Supports audio embedding and mixing.
 Supports audio de-embedding.
 Auto-switching at single window.
 Cycles through the windows from A to D by swap button.
 Base on FPGA Technology, layout and size of the windows can be customized.
 Resizes the windows in 3 different sizes.
 16 pre-defined layouts for multi-view.
 Multiple control methods, including an assignable front panel, IR remote, web GUI
and RS232 port.
1.2 Package List

1x 4K 4x1 Seamless Switcher.

1x IR Remote

4x Plastic Cushions

2x Mounting Ears

4x Mounting Screws

2x 3-pin Terminal Block

1x RS232 Cable (3-pin to DB9)

1x Power Adapter (24V DC 1.25A)

1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.