Seada SD-MV-CM41 - Special Command

4K 4x1 Seamless Switcher with Multi-view
Website: www.seada.co.uk 30 / 33 E-mail: sales@seada.co.uk
Command Function
Command & Feedback
Example
#SET_SRC_REW [PARAM]
Send CEC rewind command to source
device.
[PARAM]=1 ~ 4
1 - HDMI 1
2 - HDMI 2
3 - HDMI 3
4 - HDMI 4
#SET_SRC_REW 1
@SRC_REW 1
#SET_SRC_FF [PARAM]
Send CEC fast-forward command to
source device.
[PARAM]=1 ~ 4
1 - HDMI 1
2 - HDMI 2
3 - HDMI 3
4 - HDMI 4
#SET_SRC_FF 1
@SRC_MENU 1
#SET_DIS_ON
Send CEC ON command to display
device.
@DIS_ON
#SET_DIS_OFF
Send CEC OFF command to display
device.
@DIS_OFF
#SET_DIS_SOURCE
Send CEC SOURCE command to
display device.
@DIS_SOURCE
#SET_DIS_MUTE
Send CEC MUTE command to display
device.
@DIS_MUTE/UNMUTE
#SET_DIS_VOL+
Send CEC volume plus command to
display device.
@DIS_VOL+
#SET_DIS_VOL-
Send CEC volume minus command to
display device.
@DIS_VOL-
8.6 Special Command
Note: The below commands don’t need ending mark.
Command Description
Command & Feedback
Example
#SET_ON_[PARAM]:XXXX
Set the ASCII command to be sent to
display device when power on the
switcher.
[PARAM]= 01~07
01 - 115200
#SET_ON_05:1234567