Seada SD-MV-CM41 - Page 33

4K 4x1 Seamless Switcher with Multi-view
Website: www.seada.co.uk 31 / 33 E-mail: sales@seada.co.uk
Command Description
Command & Feedback
Example
02 - 57600
03 - 38400
04 - 19200
05 - 9600
06 - 4800
07 - 2400
XXXX= ASCII data to be sen
t (Up to 48
characters).
@@BAUDRATE: 9600
@DISPLAY ON TO
SEND:1234567
#SET_H_ON_[PARAM]:XX
XX
Set the HEX command to be sent to
display device when power on the
switcher.
[PARAM]= 01~07
01 - 115200
02 - 57600
03 - 38400
04 - 19200
05 - 9600
06 - 4800
07 - 2400
XX XX= HEX data to be sen
t (X = 0~9,
A~F and up to 20 XX).
#SET_H_ON_05:30 31 32
33 34
@BAUDRATE: 9600
@DISPLAY ON HEX TO
SEND:30 31 32 33 34
#SET_OF_[PARAM]:XXXX
Set the ASCII command to be sent to
display device when the switcher enter
power off or standby mode.
[PARAM]= 01~07
01 - 115200
02 - 57600
03 - 38400
04 - 19200
05 - 9600
06 - 4800
07 - 2400
XXXX= ASCII data to be sen
t (Up to 48
characters).
#SET_OF_05:ABCDEFG
@BAUDRATE: 9600
@DISPLAY OFF TO
SEND:ABCDEFG