Seada SD-MV-CM41 - Page 34

4K 4x1 Seamless Switcher with Multi-view
Website: www.seada.co.uk 32 / 33 E-mail: sales@seada.co.uk
Command Description
Command & Feedback
Example
#SET_H_OF_[PARAM]:XX
XX
Set the HEX command to be sent to
display device when the switcher enter
power off or standby mode.
[PARAM]= 01~07
01 - 115200
02 - 57600
03 - 38400
04 - 19200
05 - 9600
06 - 4800
07 - 2400
XX XX= HEX data to be sent (X = 0~9,
A~F and up to 20 XX).
#SET_OF_05:41 42 43 44
45 46
@BAUDRATE: 9600
@DISPLAY OFF HEX TO
SEND:41 42 43 44 45 46