Seaga N2G5000 - OPTIONS; FORCED VEND; BILL ESCROW

EL950.1.1.1062C.4-2017
Page47
*‐Exit,nochange4‐Edit
7. Press*threetimestoexit 0.00
SELSTY
LE
Note:Mustbesetto3Digit.
STEP DISPLAY
1. PressServiceModeButton MotorCountorErrorCode**
2. Press4forConfiguration Configuration
3. Press0forAdvancedConfig
Password:
Usekeypadtoenterpassword
4. Press5forSelStyle
SelStyle(CurrentSetting)
*‐Exit,nochange5‐Edit
5. Press5totoggle3digit,2Dgt40+,2‐Dgtever,*/#USD
SelStyle(ChoiceFlashing)
*‐Exit,nochange#toSave
6. Press#tosavethesetting
SelStyle(NewSetting)
*‐Exit,nochange5‐Edit
7. Press*threetimestoexit 0.00
5. OPTI
ONS
Thefollowingsub‐menusareincludedintheOptionsMenu:
 ForcedVend

OpticalVend
 BillEscrow

POSMessage
 MultiVend

SetPoint
 FreeVend

SensitivityAdjust
 FastChange
FORCEDVEND
Forcesthecustomertocompleteapurchaseoncetheyhavemadepaymentinanyform.
NOTE:IfacustomerchoosesaForcedVendselectionandthemotorfails,thecustomerwillbe
allowedtoescrowthecredit.
STEP DISPLAY
1. PressServiceModeButton MotorCountorErrorCode**
2. Press5forOptionsMenu Options
3. Press1forForcedVendMenu
ForcedVend(CurrentSetting)
*
‐Exit1‐Edit
4. Press1totogglebetweenONandOFF
ForcedVend(ChoiceFlashing)
*
‐Exit#‐Save
5. Press#tosavethesetting
ForcedVend(NewSetting)
*
‐Exit1‐Edit
6.
Press
*
twotimestoexit
0.00
For more information contact: Gumball.com (800) 260-0010 support@gumball.com