Seaga N2G5000 - SELECTION: ALL; TEST MODES

EL950.1.1.1062C.4-2017
Page64
Thisfunctiontestsallmotorsinsequenceautomatically.Tostopthetest,press*toexit.NOTE:
Allselectionsshouldbeemptypriortoperformingthistest.
STEP DISPLAY
1. PressServiceModeButton MotorCountorErrorCode**
2. Press9forSelectionmotortestmenu
Selection:(FirstSelection)
*
‐Stop
3.
Press
*
toexittoSalesMode
0.00
10. TESTMODES
Thi
smenucontainsdiagnostictestsandsettingsforthefollowingsystems:
 Relays

SystemLogs*
 VigilantVendSensor

OnDoor
 DropBiasSetting*

ManualDefrost
STEP DISPLAY
1. PressServiceModeButton MotorCountorErrorCode**
2. Press0forTestModes TestModes
3.
Press1totestrelays;thenpress1‐6totesteachrelay.
Press2forvendsensoralignmenttest.
Press3thenpassword2314forlog.NOTE:Donotuse
unlessrequestedbytrainedpersonnel.
Press4andtoggleON/OFFtoshowerrorswhendoor
opens.
Press5forManualD
efrost,whic
hwillenableyoutoset
amanualdefrostperiodforthemachine.NOTE:Donot
useunlessrequestedbytrainedpersonnel.
TestModes1through5
4.
Press
*
toexittoSalesMode
0.00
For more information contact: Gumball.com (800) 260-0010 support@gumball.com