29
.
INSTALLATION PILOT , PANEL AND
WINDSHIELD.
1) Locate items necessary to install pilot ,
the panel and windshield.
2) A scale pilot is included with this ARF.
e Pilot included ts well in the cockpit.
(or you can order others scale pilot g-
ures made by SG Models. ey are avail-
able at SG Models distributors.).
If you are going to install a pilot gure,
please use a sanding bar to sand the base
of the gure so that it is at.
3) Position the pilot gure on the cock-
pit oor as shown. Use epoxy to glue the
base of the pilot gure, please see pictures
as shown.
Epoxy.
100mm
2x8mm
To Next Page
Loading...
