Seagull Models EXTRA 330LX - Mounting the Engine

EXTRA 330LX
Instruction Manual.
16
Install the wheel and outer wheel collar.
Use blue Loctite on the wheel collar set
screw before nal tightening
Use blue Loctite on the bolts before nal
tightening.
M3x4mm
M3x10mm
Washer.
Align mounting template to front of
rewall.
Locate the laser cut engine mounting
template.
MOUNTING THE ENGINE.
NOTE : It’s the canister mount which is
used to assemble the canister exhaust sys-
tem. It’s only for extra reference purpose
for your model.