Seagull Models RV-8 - Cowl Installation; Cowl

31
COWLING
1.
Please study images below.
2.
Tape the cowl to the fuselage using
low-tack tape.
3.
4.
Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drilling
each hole.
5.
Install the muer and muer extension
onto the engine and make the cutout in the
cowl for muer clearance. Connect the
fuel and pressure lines to the carburetor,
muer and fuel ler valve. Secure the cowl
to fuselage using the M3x12mm socket head
screws.Putting a small length of silicon fuel
tube under the head of the screw helps with
vibration.
6.
Loctite