EasyManua.ls Logo

Sealey Auto Service Series - Save Interface and Reference Function; Save Interface Details; Using the Reference (REF) Function

Sealey Auto Service Series
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 17
Original Language Version
VS8220 Issue: 2(SP) - 23/09/13
4.5.15. Capturing a Video. While in the live screen, make sure the video icon is
present at the top left portion of the screen. Press OK button to start capturing
video (g.22). You will notice that a red REC icon appears at the top right
portion of the screen, just below battery capacity icon. This shows that video
is capturing. The time at the top left portion, just below video icon, will begin
counting. This indicates how long the video has been captured. Press OK
button again to stop capturing a video. It may take a few seconds to save the
captured video to internal memory. The tool can capture a video for
approximately 80 seconds without a Micro SD card.
Note: before capturing a video, the gure at the top left under the video icon
indicates how long a section of video you can save in the space left (g.23).
g.21
g.22
g.23
© Jack Sealey Limited 2012

Other manuals for Sealey Auto Service Series

Related product manuals